------------------------------------------------------------------------ - OpenBSD 4.8 RELEASED ------------------------------------------------- Nov 1, 2010. We are pleased to announce the official release of OpenBSD 4.8. This is our 28th release on CD-ROM (and 29th via FTP). We remain proud of OpenBSD's record of more than ten years with only two remote holes in the default install. As in our previous releases, 4.8 provides significant improvements, including new features, in nearly all areas of the system: - New/extended platforms: o i386 and amd64: - ACPI-based suspend/resume works on most machines with Intel/ATI video. Machines using NVidia graphics will not resume the graphics. cardbus(4) and pcmcia(4) will still have some problems, too. - Improved hardware support, including: o New acpisony(4) driver for Sony ACPI control. o New itherm(4) driver for Intel 3400 temperature sensor. o New se(4) driver for SiS 190 10/100/Gigabit Ethernet devices. o New uguru(4) driver for ABIT temperature, voltage and fan sensors. o New owctr(4) driver for 1-Wire counter devices. o New pgs(4) driver for Programmers Switch found on some macppc machines. o Support for 82576 fiber and 82577/82578 (PCH) based devices has been added to em(4). o Support for 24-bit encodings and USB 2.0 playback has been added to uaudio(4). o Support for Winbond/Nuvoton W83627DHG-P has been added to wbsio(4). o Support for RTL8168E has been added to re(4). o Support for 800x480 has been added to udl(4). o Support for M-audio Audiophile 192k has been added to envy(4). o Support for Intel Core i3/i5 internal graphics (Ironlake) has been added to inteldrm(4) and agp(4). o The ss(4) and uscanner(4) drivers have been removed. o Improved robustness of several SCSI/SAS/RAID HBA drivers, including mpi(4), mpii(4) and ciss(4). - New tools: o iked(8), an Internet Key Exchange version 2 (IKEv2) daemon. o ldapd(8), a Lightweight Directory Access Protocol (LDAP) daemon. - Filesystem midlayer improvements: o Fix internal locking in (still experimental!) NTFS. - OpenBGPD, OpenOSPFD and other routing daemon improvements: o bgpd(8) control sockets are now specified in the config file. This removes the -s and -r arguments to bgpd. o Extended the BGP MPLS VPN support to allow Layer-3 MPLS VPNs to be terminated on OpenBSD with the help of mpe(4), ldpd(8), and bgpd(8). o bgpd(8) supports multiple FIBs and it is possible to assign them to RIBs for redistribution. o bgpd now supports to use neighbor-as in AS filter statements and added two new filters -- max-as-seq and max-as-len -- to limit the length of a sequence of a single AS or the total length of an AS path. o Added softreconfig support in bgpd for peers changing the RIB. o Fixed multiprotocol MRT dumps and added 4-byte AS-Number support in bgpd(8). o Added support for ping6 and traceroute6 in bgplg(8) and bgplgsh(8) o ospfd(8) has better LSA pruning and config reload support. o ospf6d(8) now supports LSAs larger than the link MTU, has improved interoperability with other OSPFv3 implementations, can redistribute the default route, and will correctly handle IPv6 prefixes advertised by neighbours on the same link but not configured on the router itself. o Various improvements in ldpd(8) including correct penultimate hop popping, better session handling, and a imporved config file parser. - Generic network stack improvements: o ifconfig(8) and route(8) get better Multiprotocol Label Switching support. o traceroute(8) now supports extended ICMP headers which allows printing of MPLS labels. o Support for RFC 4941 privacy extensions for stateless address autoconfiguration has been added to inet6(4) and can be enabled via ifconfig(8). o ifconfig(8) now supports random selection of MAC addresses. o tcpdump(8) now decodes Multicast Listener Discovery version 2 and Internet Key Exchange version 2 traffic. o enc(4) and ipsec(4) are now aware of routing domains. o dhcpd(8) and dhclient(8) and are now capable of running in different routing domains. o Added MPLS support and a simple keepalive mechanism to gre(4). o Added MPLS support to gif(4). o Support for 802.1ad-style QinQ nested VLANs with the addition of svlan(4) (service VLAN) interfaces. o Added a RTM_DESYNC routing message as indicator that route messages got dropped because of insufficent buffer space. ospfd(8) uses this message to keep the internal view of the routing table in sync. - SCSI improvements: o better cd(4) detaching. o better st(4) sense data and buf handling. o eliminate excessive delays when starting DVD playing. o ask only for minimal (i.e. 18 bytes) sense data, fixing usb devices. o migrate to using bufq. o always try READ CAPACITY 16 on devices claiming to be SCSI-3. o many performance and reliability improvements as a result of new SCSI midlayer: - introduce round-robin scheduling of resources for outstanding device commands to prevent a single device from monopolising the bus. - significant reduction in memory consumption used for tracking devices attached to buses. - eliminate many unnecessary splbio/splx calls in SCSI drivers. - eliminate many use after free's exposed by new SCSI midlayer. - eliminate scsi_scsi_cmd(), simplifying calling inside SCSI midlayer. - eliminate struct scsi_device. - eliminate many uninitialized data references and invalid scsi_done() calls exposed by new SCSI midlayer. - eliminate use of EAGAIN. - eliminate almost all uses of NO_CCB and XS_NO_CCB. - Assorted improvements: o mbtowc(3) multi-byte/wide-character conversion functions have been added to the C library, and setlocale(3) now supports the en_US.UTF-8 locale. o posix_madvise(2), posix_memalign(3), strndup(3), and strnlen(3) have been added to the C library. o The event(3) library was updated to version 1.4.14b. o The pthreads(3) library now implements the pthread_rwlock_timed{rd,wr}lock interfaces. o AES-NI support has been integrated into the OpenSSL crypto(3) library. o MIDI control in non-server mode was added to aucat(1), including seeking within .wav files o A new record-what-you-hear feature was added to aucat(1). o The minimum extra latency of the aucat(1) server was lowered to a single block, improving usability of low-latency programs without stability compromise. o disklabel(8) now supports unique disk identifiers. o ftp(1) now handles redirection to relative URLs in the Location: header of HTTP responses. o lint(1) now recognizes the C99 data types _Bool and _Complex and some related gcc extensions. o make(1) now allows variables in SysV modifiers, and implements the :QL (quote list) modifier. o man(1) now allows to combine the -s option with -m or -M. o Improved directory editing in mg(1). o newfs(8) has been tweaked to better support large file systems. o od(1) now supports the POSIX -A option to select an input address base. o sendbug(1) now includes the output of usbdevs -v into the template. o smtpd(8) now supports the SIZE and ENHANCEDSTATUSCODES extensions and the "plain" backend for maps, and performance was improved when handling large amounts of mail. o wsconsctl(8) now handles more than one keyboard, mouse and display. o Many memory leaks have been fixed in various userland utilities. o amd64, i386, hppa, sparc64, socppc and macppc platforms were switched over to gcc4. o newfs(8) now makes FFS2 the default for partitions larger than INT_MAX blocks. o dhcpd(8) now includes the server id in NAK messages, as required by some relays. o disklabel(8) now aligns the start and end of FFS partitions on bsize boundaries where it can, to improve performance on 4096-byte block devices. o by default, read and write caching is now turned on for non-USB scsi disks. o getdirentries(2) now checks to ensure that it doesn't wrap or truncate directory information on architectures where LONG is a different size from LONG LONG. o disklabel(8) now ensures correct physical bounds and disk size are used when building a disklabel from saved ascii disklabel. o it is again possible to build a bsd.rd that has DDB. o pms(4) now works much better with various trackpads and over suspend/resume cycles. o fdisk(8) now aligns the OpenBSD partition on a power of 2 block boundary to improve performance on 4096-byte block devices. o nfsd(8) now logs start up errors to the system log as well as the console. o nfsd(8) now errors out if given an invalid number of servers to run. - Install/Upgrade process changes: o If the system time is off by more than 120 seconds, ask if the user wants to set it accordingly. o disklabel(8) now allows to customize auto allocated labels using the -R option. o Default network install method changed from FTP to HTTP. o Automatically set /etc/pkg.conf `installfrom' entry to the public mirror used while installing or upgrading. o sysmerge(8) now automatically installs missing users and groups. - OpenSSH 5.5: o New features: - Added a ControlPersist option to ssh_config(5). - Hostbased authentication may now use certificate host keys. - ssh-keygen(1) now supports signing certificate using a CA key that has been stored in a PKCS#11 token. - ssh(1) will now log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks. - Expand %h to the hostname in ssh_config Hostname options. - Allow ssh-keygen(1) to import and export of PEM and PKCS#8 keys. - sshd(8) will now queue debug messages for bad ownership or permissions on the user's keyfiles encountered during authentication. - ssh(1) connection multiplexing now supports remote forwarding with dynamic port allocation and can report the allocated port back to the user. - sshd(8) now supports indirection in matching of principal names listed in certificates. sshd(8) now has a new AuthorizedPrincipalsFile option. - Additional sshd_config(5) options are now valid inside Match blocks: o AuthorizedKeysFile o AuthorizedPrincipalsFile o HostbasedUsesNameFromPacketOnly o PermitTunnel o The following significant bugs have been fixed in this release: - The PKCS#11 code now retries a lookup for a private key if there is no matching key with CKA_SIGN attribute enabled (bz#1736). - Unbreak strdelim() skipping past quoted strings. - sftp(1): fix swapped args in upload_dir_internal() (bz#1797). - Fix a longstanding problem where if you suspend scp(1) at the password/passphrase prompt the terminal mode is not restored. - Fix a PKCS#11 crash on some smartcards by validating the length returned for C_GetAttributValue (bz#1773). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (bz#1655). - Print warning for missing home directory when ChrootDirectory=none. (bz#1564). - sftp(1): fix a memory leak in do_realpath() error path (bz#1771). - ssh-keygen(1): Standardise error messages when attempting to open private key files to include "progname: filename: error reason" (bz#1783). - Replace verbose and overflow-prone Linebuf code with read_keyfile_line() (bz#1565). - Include the user name on "subsystem request for ..." log messages. - ssh(1) and sshd(8): remove hardcoded limit of 100 permitopen clauses and port forwards per direction (bz#1327). - sshd(8): ignore stderr output from subsystems to avoid hangs if a subsystem or shell initialisation writes to stderr (bz#1750). - Skip the initial check for access with an empty password when PermitEmptyPasswords=no (bz#1638). - sshd(8): fix logspam when key options (from="..." especially) deny non-matching keys (bz#1765). - ssh-keygen(1): display a more helpful error message when $HOME is inaccessible while trying to create .ssh directory (bz#1740). - ssh(1): fix hang when terminating a mux slave using ~ (bz#1758). - ssh-keygen(1): refuse to generate keys longer than OPENSSL_[RD]SA_MAX_MODULUS_BITS (bz#1516). - Suppress spurious tty warning when using -O and stdin is not a tty (bz#1746). - Kill channel when pty allocation requests fail (bz#1698). - Mandoc 1.10.5: o The mandoc(1) utility is now used to build all manuals in the base system and in Xenocara from mdoc(7) and man(7) sources. o New integrated roff preprocessor with minimal support for conditional requests, nested roff requests, string definitions, roff registers, also parsing and ignoring macro definitions. o Improved support for manual pages generated by pod2man(1). o Many parser improvements, in particular mdoc(7) support for word keeps, synopsis mode in arbitrary sections, graceful handling of badly nested blocks, and improved parsing of column displays. o New PostScript and PDF output frontends. o Many ASCII and HTML output formatting improvements, for example proper synopsis indentation and improved end-of-sentence detection. o Considerably improved syntax checking and error reporting. - Over 5,800 ports, major robustness and speed improvements in package tools. - Many pre-built packages for each architecture: o i386: 6218 o sparc64: 5950 o alpha: 5827 o sh: 1100 o amd64: 6166 o powerpc: 5996 o sparc: 4130 o arm: 5628 o hppa: 5632 o vax: 1528 o mips64: 3632 o mips64el: 4486 - Some highlights: o Gnome 2.30.2 o KDE 3.5.10 o Xfce 4.6.2 o MySQL 5.1.48 o PostgreSQL 8.4.4 o Postfix 2.7.1 o OpenLDAP 2.3.43 o Mozilla Firefox 3.6.8 and 3.5.11 o Mozilla Thunderbird 3.1.1 o OpenOffice.org 3.2.1 o Emacs 21.4 and 22.3 o Vim 7.2.444 o PHP 5.2.13 o Python 2.4.6, 2.5.4 and 2.6.5 o Ruby 1.8.6.369 o Mono 2.6.4 - As usual, steady improvements in manual pages and other documentation. - The system includes the following major components from outside suppliers: o Xenocara (based on X.Org 7.5 with xserver 1.8 + patches, freetype 2.3.12, fontconfig 2.8.0, Mesa 7.8.2, xterm 258 and more) o Gcc 2.95.3 (+ patches), 3.3.5 (+ patches) and 4.2.1 (+patches) (depends on the architecture) o Perl 5.10.1 (+ patches) o Our improved and secured version of Apache 1.3, with SSL/TLS and DSO support o OpenSSL 0.9.8k (+ patches) o Groff 1.15 o Sendmail 8.14.3, with libmilter o Bind 9.4.2-P2 (+ patches) o Lynx 2.8.6rel.5 with HTTPS and IPv6 support (+ patches) o Sudo 1.7.2 o Ncurses 5.7 o Latest KAME IPv6 o Heimdal 0.7.2 (+ patches) o Arla 0.35.7 o Binutils 2.15 (+ patches) o Gdb 6.3 (+ patches) If you'd like to see a list of what has changed between OpenBSD 4.7 and 4.8, look at http://www.OpenBSD.org/plus48.html Even though the list is a summary of the most important changes made to OpenBSD, it still is a very very long list. ------------------------------------------------------------------------ - SECURITY AND ERRATA -------------------------------------------------- We provide patches for known security threats and other important issues discovered after each CD release. As usual, between the creation of the OpenBSD 4.8 FTP/CD-ROM binaries and the actual 4.8 release date, our team found and fixed some new reliability problems (note: most are minor and in subsystems that are not enabled by default). Our continued research into security means we will find new security problems -- and we always provide patches as soon as possible. Therefore, we advise regular visits to http://www.OpenBSD.org/security.html and http://www.OpenBSD.org/errata.html Security patch announcements are sent to the security-announce@OpenBSD.org mailing list. For information on OpenBSD mailing lists, please see: http://www.OpenBSD.org/mail.html ------------------------------------------------------------------------ - CD-ROM SALES --------------------------------------------------------- OpenBSD 4.8 is also available on CD-ROM. The 3-CD set costs $50 CDN and is available via mail order and from a number of contacts around the world. The set includes a colourful booklet which carefully explains the installation of OpenBSD. A new set of cute little stickers is also included (sorry, but our FTP mirror sites do not support STP, the Sticker Transfer Protocol). As an added bonus, the second CD contains an audio track, a song entitled "El Puffiachi". MP3 and OGG versions of the audio track can be found on the first CD. Lyrics (and an explanation) for the songs may be found at: http://www.OpenBSD.org/lyrics.html#48 Profits from CD sales are the primary income source for the OpenBSD project -- in essence selling these CD-ROM units ensures that OpenBSD will continue to make another release six months from now. The OpenBSD 4.8 CD-ROMs are bootable on the following four platforms: o i386 o amd64 o macppc o sparc64 (Other platforms must boot from floppy, network, or other method). For more information on ordering CD-ROMs, see: http://www.OpenBSD.org/orders.html The above web page lists a number of places where OpenBSD CD-ROMs can be purchased from. For our default mail order, go directly to: https://https.OpenBSD.org/cgi-bin/order All of our developers strongly urge you to buy a CD-ROM and support our future efforts. Additionally, donations to the project are highly appreciated, as described in more detail at: http://www.OpenBSD.org/goals.html#funding ------------------------------------------------------------------------ - OPENBSD FOUNDATION --------------------------------------------------- For those unable to make their contributions as straightforward gifts, the OpenBSD Foundation (http://www.openbsdfoundation.org) is a Canadian not-for-profit corporation that can accept larger contributions and issue receipts. In some situations, their receipt may qualify as a business expense writeoff, so this is certainly a consideration for some organizations or businesses. There may also be exposure benefits since the Foundation may be interested in participating in press releases. In turn, the Foundation then uses these contributions to assist OpenBSD's infrastructure needs. Contact the foundation directors at directors@openbsdfoundation.org for more information. ------------------------------------------------------------------------ - T-SHIRT SALES -------------------------------------------------------- The OpenBSD distribution companies also sell tshirts and polo shirts. And our users like them too. We have a variety of shirts available, with the new and old designs, from our web ordering system at, as described above. There is no specific new OpenBSD shirt for this release -- we decided to skip a release. Hoever, we also sell our older shirts, as well as a selection of OpenSSH t-shirts. ------------------------------------------------------------------------ - FTP INSTALLS --------------------------------------------------------- If you choose not to buy an OpenBSD CD-ROM, OpenBSD can be easily installed via FTP. Typically you need a single small piece of boot media (e.g., a boot floppy) and then the rest of the files can be installed from a number of locations, including directly off the Internet. Follow this simple set of instructions to ensure that you find all of the documentation you will need while performing an install via FTP. With the CD-ROMs, the necessary documentation is easier to find. 1) Read either of the following two files for a list of ftp mirrors which provide OpenBSD, then choose one near you: http://www.OpenBSD.org/ftp.html ftp://ftp.OpenBSD.org/pub/OpenBSD/4.8/ftplist As of Nov 1, 2010, the following ftp mirror sites have the 4.8 release: ftp://ftp.eu.openbsd.org/pub/OpenBSD/4.8/ Stockholm, Sweden ftp://ftp.bytemine.net/pub/OpenBSD/4.8/ Oldenburg, Germany ftp://ftp.ini.uzh.ch/pub/OpenBSD/4.8/ Zurich, Switzerland ftp://mirror.aarnet.edu.au/pub/OpenBSD/4.8/ Brisbane, Australia ftp://ftp.wu-wien.ac.at/pub/OpenBSD/4.8/ Vienna, Austria ftp://ftp.usa.openbsd.org/pub/OpenBSD/4.8/ CO, USA ftp://ftp5.usa.openbsd.org/pub/OpenBSD/4.8/ CA, USA ftp://obsd.cec.mtu.edu/pub/OpenBSD/4.8/ Michigan, USA The release is also available at the master site: ftp://ftp.openbsd.org/pub/OpenBSD/4.8/ Alberta, Canada However it is strongly suggested you use a mirror. Other mirror sites may take a day or two to update. 2) Connect to that ftp mirror site and go into the directory pub/OpenBSD/4.8/ which contains these files and directories. This is a list of what you will see: ANNOUNCEMENT armish/ mvme68k/ sparc64/ Changelogs/ ftplist mvme88k/ src.tar.gz HARDWARE hp300/ packages/ sys.tar.gz PACKAGES hppa/ ports.tar.gz tools/ PORTS i386/ root.mail vax/ README landisk/ sgi/ xenocara.tar.gz alpha/ mac68k/ socppc/ zaurus/ amd64/ macppc/ sparc/ It is quite likely that you will want at LEAST the following files which apply to all the architectures OpenBSD supports. README - generic README HARDWARE - list of hardware we support PORTS - description of our "ports" tree PACKAGES - description of pre-compiled packages root.mail - a copy of root's mail at initial login. (This is really worthwhile reading). 3) Read the README file. It is short, and a quick read will make sure you understand what else you need to fetch. 4) Next, go into the directory that applies to your architecture, for example, i386. This is a list of what you will see: INSTALL.i386 cd48.iso floppyB48.fs pxeboot* INSTALL.linux cdboot* floppyC48.fs xbase48.tgz MD5 cdbr* game48.tgz xetc48.tgz base48.tgz cdemu48.iso index.txt xfont48.tgz bsd* comp48.tgz install48.iso xserv48.tgz bsd.mp* etc48.tgz man48.tgz xshare48.tgz bsd.rd* floppy48.fs misc48.tgz If you are new to OpenBSD, fetch _at least_ the file INSTALL.i386 and the appropriate floppy*.fs or install48.iso files. Consult the INSTALL.i386 file if you don't know which of the floppy images you need (or simply fetch all of them). If you use the install48.iso file (roughly 200MB in size), then you do not need the various *.tgz files since they are contained on that one-step ISO-format install CD. 5) If you are an expert, follow the instructions in the file called README; otherwise, use the more complete instructions in the file called INSTALL.i386. INSTALL.i386 may tell you that you need to fetch other files. 6) Just in case, take a peek at: http://www.OpenBSD.org/errata.html This is the page where we talk about the mistakes we made while creating the 4.8 release, or the significant bugs we fixed post-release which we think our users should have fixes for. Patches and workarounds are clearly described there. Note: If you end up needing to write a raw floppy using Windows, you can use "fdimage.exe" located in the pub/OpenBSD/4.8/tools directory to do so. ------------------------------------------------------------------------ - X.ORG FOR MOST ARCHITECTURES ----------------------------------------- X.Org has been integrated more closely into the system. This release contains X.Org 7.4. Most of our architectures ship with X.Org, including amd64, sparc, sparc64 and macppc. During installation, you can install X.Org quite easily. Be sure to try out xdm(1) and see how we have customized it for OpenBSD. ------------------------------------------------------------------------ - PORTS TREE ----------------------------------------------------------- The OpenBSD ports tree contains automated instructions for building third party software. The software has been verified to build and run on the various OpenBSD architectures. The 4.8 ports collection, including many of the distribution files, is included on the 3-CD set. Please see the PORTS file for more information. Note: some of the most popular ports, e.g., the Apache web server and several X applications, come standard with OpenBSD. Also, many popular ports have been pre-compiled for those who do not desire to build their own binaries (see BINARY PACKAGES, below). ------------------------------------------------------------------------ - BINARY PACKAGES WE PROVIDE ------------------------------------------- A large number of binary packages are provided. Please see the PACKAGES file (ftp://ftp.OpenBSD.org/pub/OpenBSD/4.8/PACKAGES) for more details. ------------------------------------------------------------------------ - SYSTEM SOURCE CODE --------------------------------------------------- The CD-ROMs contain source code for all the subsystems explained above, and the README (ftp://ftp.OpenBSD.org/pub/OpenBSD/4.8/README) file explains how to deal with these source files. For those who are doing an FTP install, the source code for all four subsystems can be found in the pub/OpenBSD/4.8/ directory: xenocara.tar.gz ports.tar.gz src.tar.gz sys.tar.gz ------------------------------------------------------------------------ - THANKS --------------------------------------------------------------- Ports tree and package building by Jasper Lievisse Adriaanse, Landry Breuil, Michael Erdely, Stuart Henderson, Peter Hessler, Paul Irofti, Antoine Jacoutot, Robert Nagy, and Christian Weisgerber. System builds by Theo de Raadt, Mark Kettenis, and Miod Vallat. X11 builds by Todd Fries and Miod Vallat. ISO-9660 filesystem layout by Theo de Raadt. We would like to thank all of the people who sent in bug reports, bug fixes, donation cheques, and hardware that we use. We would also like to thank those who pre-ordered the 4.8 CD-ROM or bought our previous CD-ROMs. Those who did not support us financially have still helped us with our goal of improving the quality of the software. Our developers are: Alexander Bluhm, Alexander Hall, Alexander von Gernler, Alexander Yurchenko, Alexandre Ratchov, Alexey Vatchenko, Anders Magnusson, Andreas Gunnarsson, Anil Madhavapeddy, Antoine Jacoutot, Ariane van der Steldt, Artur Grabowski, Austin Hook, Benoit Lecocq, Bernd Ahlers, Bob Beck, Bret Lambert, Can Erkin Acar, Chad Loder, Charles Longeau, Chris Kuethe, Christian Weisgerber, Claudio Jeker, Dale Rahn, Damien Bergamini, Damien Miller, Dariusz Swiderski, Darren Tucker, David Gwynne, David Hill, David Krause, Edd Barrett, Eric Faurot, Esben Norby, Fabien Romano, Federico G. Schwindt, Felix Kronlage, Gilles Chehade, Giovanni Bechis, Gordon Willem Klok, Henning Brauer, Ian Darwin, Igor Sobrado, Ingo Schwarze, Jacek Masiulaniec, Jacob Meuser, Jakob Schlyter, Janne Johansson, Jared Yanovich, Jason Dixon, Jason George, Jason McIntyre, Jason Meltzer, Jasper Lievisse Adriaanse, Jim Razmus II, Joel Sing, Joerg Goltermann, Johan Mson Lindman, Jolan Luff, Jonathan Armani, Jonathan Gray, Jordan Hargrave, Joshua Stein, Kenneth R Westerback, Kevin Lo, Kevin Steves, Kjell Wooding, Kurt Miller, Landry Breuil, Laurent Fanis, Marc Espie, Marco Peereboom, Marco Pfatschbacher, Marco S Hyman, Marcus Glocker, Marek Vasut, Mark Kettenis, Mark Uemura, Markus Friedl, Martin Reindl, Martynas Venckus, Mathieu Sauve-Frankel, Mats O Jansson, Matthias Kilian, Matthieu Herrb, Michael Erdely, Michael Knudsen, Michele Marchetto, Mike Larkin, Miod Vallat, Moritz Grimm, Moritz Jodeit, Nicholas Marriott, Nick Holland, Nikolay Sturm, Okan Demirmen, Oleg Safiullin, Otto Moerbeek, Owain Ainsworth, Paul de Weerd, Paul Irofti, Peter Hessler, Peter Stromberg, Peter Valchev, Philip Guenther, Pierre-Emmanuel Andre, Pierre-Yves Ritschard, Rainer Giedat, Reyk Floeter, Robert Nagy, Rui Reis, Ryan Thomas McBride, Simon Bertrang, Simon Perreault, Stefan Kempf, Stefan Sperling, Stephan A. Rickauer, Steven Mestdagh, Stuart Henderson, Takuya Asada, Ted Unangst, Theo de Raadt, Thordur I Bjornsson, Tobias Stoeckmann, Tobias Weingartner, Todd C. Miller, Todd Fries, Will Maier, William Yodlowsky, Xavier Santolaria, Yasuoka Masahiko, Yojiro Uo